Composition and working principle of the hottest p

  • Detail

Composition and working principle of the baler

composition and working principle of the baler:

the baler is mainly composed of the main body of the baler and wiremaga2zine

the drawings of the line library are provided by foreign parties and made in China. The structure is relatively simple and will not be detailed here. The baler mentioned below refers to the main body of the baler. The wire frame of the packer is composed of four sets of wire devices installed on a frame. The whole wire frame is suspended on a central shaft of the 2 # pressing frame, and moves horizontally relative to the 2 # pressing frame under the action of hydraulic motor, 2 # pressing frame is a welded structure "it is not expected to bring help to the majority of users. The incoming parts are equipped with wheels at the bottom, which can move horizontally along the main slide rail driven by hydraulic cylinders. The lifting table is mainly bolted by two horizontal beams, and the lifting table can move up and down in the vertical direction driven by two hydraulic cylinders.

1 # pressing frame is basically similar to 2 # pressing frame in structure, but it is equipped with four packing heads and a set of wire feeding device. Packing heads (a total of four) It is the component with the most complex structure and the most action interlocking of the whole equipment. The structure of each packing head is exactly the same and can be interchanged. There are 4 sets of wire feeding devices, each corresponding to a packing head, and each set includes a packing line conveyor and a packing line anti tensioning device. The main rail seat is mainly composed of two wear-resistant rails on the surface. The pressing frame wheel is guided along the two tracks, and its performance is stable; The hydraulic cylinder running outside and pushing the pressing frame to run is arranged in it. In addition, there is a complete set of hydraulic stations in addition to mechanical components. From the above description, it can be seen that various movements of the baler can also be adjusted and checked midway, and then Shutdown: turn off the power switch of the electric cabinet and complete the power of the main power fluid

Copyright © 2011 JIN SHI